Swinging Gate Automations Cyprus
Pan. Chrysostomou Auto Doors offers Gate Operators Cyprus that are sleek in design, with outstanding durability, remaining unaltered with time even in extreme weather conditions, yet practical and safe, with current sensors or encoders, to ensure the reversal or stopping of the movement of the operators upon contact with any obstacle, complying with all European safety standards, you can rest assured that every aspect of safety has been covered.
Key operated release locks which are easily accessible allowing quick release of the operators in the case of power failures and for all 24 volt operators optional buffer back up batteries are available.
Skillfully carried out installations ensuring long lasting operations.
Introducing the NEW range of DITEC-ENTREMATIC swinging gate automations and accessories
NOW AVAILABLE!
New PWR range of Swinging gate operators
New PWR range of Swinging gate operators
2017-03 Entrematic CANCELLI_1
DITEC - ENTREMATIC PWR 25 - Innovative actuator for swing gates with wings up to 2,5 m for residential applications
Ditec PWR25 is the new electromechanical operator for swing gate conceived for residential applications. Designed and manufactured to bring you the highest quality, robustness and to cut installation, set-up and maintenance time.
Thanks to the virtual encoder technology, the 24 V DC motor and the use of LCU series control units, Ditec PWR 25 ensures the highest safety, both for installers and end users.
Ditec PWR 25 is among the fastest and most silent operators in the market today!
Ditec PWR 25 is extremely fast to mount: the actuators are complete with mechanical stops both for opening and closing, pre-mounted and asymmetrical to allow for the finest regulation of wing position; easy fixing to brackets with just one tool; sturdy and pre-drilled mounting brackets; also available the innovative MOUNTING TOOL (Entrematic patent) which helps you saving up to 60% of installation time.
Ditec PWR 25 is long lasting and resistant to demanding weather conditions thanks to its robust aluminum body, sturdy mounting brackets and fixing plates designed to withstand the highest load conditions. Even more, a cataphoresis coating is added to the worm screw to prevent rust and a plastic protection ensures further protection against external dirt.
Furthermore, Ditec PWR range is fully compliant to current European Standards and has passed successfully corrosion tests (according to ISO 9227) and resistance to UV ray effects (according to ISO 489-2).
DITEC - ENTREMATIC PWR 35 - Innovative actuator for swing gates with wings up to 3,5 m for residential and condo applications
Ditec PWR35 is the new electromechanical operator for swing gate conceived for residential and condo applications. Designed and manufactured to bring you the highest quality, robustness and to cut installation, set-up and maintenance time.
Thanks to the virtual encoder technology, the 24 V DC motor and the use of LCU series control units, Ditec PWR 35 ensures the highest safety, both for installers and end users.
Ditec PWR 35 is among the fastest and most silent operators in the market today!
Ditec PWR 35 is extremely fast to mount: the actuators are complete with mechanical stops both for opening and closing, pre-mounted and asymmetrical to allow for the finest regulation of wing position; easy fixing to brackets with just one tool; sturdy and pre-drilled mounting brackets; also available the innovative MOUNTING TOOL (Entrematic patent) which helps you saving up to 60% of installation time.
Ditec PWR 35 is long lasting and resistant to demanding weather conditions thanks to its robust aluminum body, sturdy mounting brackets and fixing plates designed to withstand the highest load conditions. Even more, a cataphoresis coating is added to the worm screw to prevent rust and a plastic protection ensures further protection against external dirt; Ditec PWR 35 features a patented device to ensure easy greasing to speed up regular maintenance.
Furthermore, Ditec PWR range is fully compliant to current European Standards and has passed successfully corrosion tests (according to ISO 9227) and resistance to UV ray effects (according to ISO 489-2).
DITEC ENTREMATIC PWR 50 - Innovative actuator for swing gates with wings up to 5 m for residential, condo and industrial applications
Ditec PWR50 is the new electromechanical operator for swing gate conceived for residential and condo applications. Designed and manufactured to bring you the highest quality, robustness and to cut installation, set-up and maintenance time.
Thanks to the virtual encoder technology, the 24 V DC motor and the use of LCU series control units, Ditec PWR 50 ensures the highest safety, both for installers and end users.
Ditec PWR 50 is available in both reversible and irreversible versions and with or without magnetic limit switches (pre-wired)!
Ditec PWR 50 is extremely fast to mount: the actuators are complete with mechanical stops both for opening and closing, pre-mounted and asymmetrical to allow for the finest regulation of wing position; easy fixing to brackets with just one tool; sturdy and pre-drilled mounting brackets; also available the innovative MOUNTING TOOL (Entrematic patent) which helps you saving up to 60% of installation time.
Ditec PWR 50 is long lasting and resistant to demanding weather conditions thanks to its robust aluminum body, sturdy mounting brackets and fixing plates designed to withstand the highest load conditions. Even more, a cataphoresis coating is added to the worm screw to prevent rust and dustproof brushes ensures further protection against external dirt.
This model comes with a removable aluminum cover of the worm screw for easy access to internal parts, quite handy in case of maintenance operations.
Furthermore, Ditec PWR range is fully compliant to current European Standards and has passed successfully corrosion tests (according to ISO 9227) and resistance to UV ray effects (according to ISO 489-2).
PRINCE
PRINCE (produced by RIB of Italy) is a sleek stylish highly robust swinging gate automation Cyprus for gate leaves of up to 2 meters an/or 200kg, it encorporates a obstacle detection sensor which reverses the movement of the gate upon contact with any obstacle in both the opening and closing phases. Power failures aren’t a problem for this 24 volt operator with its easily accessible key release system and/or optional buffer batteries.
ARC
ARC (supplied by DITEC/ENTREMATIC ) is an electro mechanical swinging gate operator Cyprus specially designed for gates with a leaf length of up to 5mtrs which are installed on large pillars, where the distance between the the hinge and the edge of the pillar is rather considerable. Optional buffer batteries are also available for this operator
CUBIC
CUBIC (supplied by DITEC-ENTREMATIC of Italy) is an underground swinging gate operator Cyprus that is designed for ornimental gates that are opened and closed frequently or subject to heavy-duty use.
The motors are housed in a sturdy electrically zinc plated steel foundation casing to increase resistance to weathering. The automation is fixed by means of stainless steel screws pre-built in the foundation casing.
In the 110° angle version, rotation takes place by means a lever system, whilst in the 180° angle version rotation is carried out by means of a chain.
FACIL
FACIL (supplied by DITEC/ENTREMATIC ) is an electro mechanical swinging gate operator Cyprus specially designed for gates with a leaf length of up to 2.3mtrs which are installed on large pillars, where the distance between the the hinge and the edge of the pillar is rather considerable. Optional buffer batteries are also available for this operator
Premier
PREMIER (supplied by RIB of Italy) is a 24volt electro mechanical swinging gate operator Cyprus specially designed for gates with a leaf length of up to 2mtrs which are installed on large pillars, where the distance between the the hinge and the edge of the pillar is rather considerable. Optional buffer batteries are also available for this operator
Sliding Gate Automations Cyprus
Pan. Chrysostomou Auto Doors offers Gate Operators Cyprus that are sleek in design, with outstanding durability, remaining unaltered with time even in extreme weather conditions, yet practical and safe, with current sensors or encoders, to ensure the reversal or stopping of the movement of the operators upon contact with any obstacle, complying with all European safety standards, you can rest assured that every aspect of safety has been covered.
Key operated release locks which are easily accessible allowing quick release of the operators in the case of power failures and for all 24 volt operators optional buffer back up batteries are available.
Skillfully carried out installations ensuring long lasting operations.
NEOs
THE INTELLIGENT, SAFE AND VERSATILE AUTOMATION
Ditec NeoS is the operating device for residential, commercial and industrial applications, designed to work even under intense use and in demanding environmental conditions.
Fast to install and easy to maintain, it's available in 4 versions for gates of 300 kg, 400 kg, 600 kg and 1000 kg and comes with a control panel with display built in to the operating device. Two different performance levels are available: Ditec NeoS and Ditec NeoS+.
A complete product
COMPLETE PEACE OF MIND: sturdy, durable and reliable over time
-
single-block, die-cast aluminium base provides unmatched stability
-
special high-quality, self-levelling grease keeps screws and crowns constantly lubricated
-
the temperature sensor fine-tunes the gear motor’s performance in the event of cold, ice and snow (NIO - No Ice Option - function).
INSTALL AND CONFIGURE the operating device more quickly
-
steel plates of different thickness and design allow for correct installation in all circumstances and leveling screws can be used to adjust the operating device to the millimeter
-
IP24D protection rating prevents all contact with live parts
-
the self-learning procedure is made easy by the display, navigation push buttons and a specific remote control, for installation of the motor in just two steps
-
here are three predefined configurations for residential and condominium use. But that’s not all: removable storage allows operating settings to be saved and copied to another operating device
-
433 MHz and 868 MHz frequencies are available
UNIQUE PERFORMANCE
-
Ditec NeoS+ offers you an advanced control panel for more precise adjustment of all settings and additional terminals for more convenient wiring operation
-
Check the status of your operating device! LEDs allow you to easily monitor the status of the operating device without opening the ASA cover.
FULL COMPLIANCE WITH EU DIRECTIVES AND STANDARDS
ION
Ditec ION is the new range of electromechanical actuators for sliding gates designed to guarantee quality, sturdiness and reliability over time, and to facilitate their installation and maintenance.
The range is made up of two motors per 400 Kg and 600 Kg wing, and integrates the multifunction control panel in the operating device.
INTELLIGENT
Ditec ION includes a rapid self-learning procedure, which automatically records all stopping positions in two operations, self-adjusting to the most diverse installation contexts.
24 V VIRTUAL ENCODER
For constant electronic monitoring of impact forces and immediate obstacle detection ensuring that the electromechanical actuator is stopped, or the motion is inverted (if configured). Optional magnetic limit switches. Additionally, in the event of a blackout, the electronic control panel intervenes activating the incorporated batteries (optional) which ensure correct operation of the system.
VERSATILE
From the control panel, it is possible to precisely manage position and speed at all times, allowing adjustment for acceleration, deceleration, start time, slowdown distance and approach speed during opening and closing.
CROSS18E
CROSS 18E (supplied by DITEC - ENTREMATIC of Italy) is a gate automation for sliding gates Cyprus of up to 1800kg with its stylish design, slow speed in approaching both in opening and closing phases, in all 24volt versions the motor is encorporated with an encoder which detects when the gate comes into contact with any obstacle and reverses the movement, providing peace of mind, security and safety. In the event of power failures all models possess an easily accessible release lock and optional buffer back up batteries, for continued (limited) use during the event of a power failure, are available for 24 volt versions.
CROSS 7
CROSS 7 (supplied by DITEC - ENTREMATIC of Italy) is an automation for sliding gates Cyprus of up to 600kg with its stylish design, slow speed in approaching both in opening and closing phases, in all 24volt versions the motor is encorporated with an encoder which detects when the gate comes into contact with any obstacle and reverses the movement, providing peace of mind, security and safety. In the event of power failures all models possess an easily accessible release lock and optional buffer back up batteries, for continued (limited) use during the event of a power failure, are available for 24 volt versions.
CROSS 30E
CROSS 30E (supplied by DITEC - ENTREMATIC of Italy) is a rugged, powerful 3 phase automation for sliding gates Cyprus of up to 3000kg ideal for industrial entrances , housed in a robust steel cabinet ensuring durability and uninterrupted operations.
Parking Barriers/Bollards Cyrpus
Pan. Chrysostomou Auto Doors Ltd can supply and install a variable collection of high performance, practical and safe Parking Barriers Cyprus. The ideal solution for all access monitoring in medium to high transit areas such as hotels, banks, shopping centres, blocks of flats, companies and camp sites who always need to monitor access to their car parking areas and to ensure that they are used only by people authorised to do so.
Easily accessible key release systems and optional buffer batteries for 24 volt barriers allows for emergencies to be successfully dealt with in the event of power failures.
Ditec QIK
QIK produced by DITEC - ENTREMATIC of Italy is a newly designed and technically advanced range of parking barriers, 230v (QIK4E) and 24v (QIK7EH) versions are available for openings up to 8mtrs. The ideal solution for a totally safe access control of medium to high transit environments.
Battery back up systems and led lights are also available for 24v versions of this barrier along with a full range of optional access control systems.
RIB Stopper T
STOPPER T, supplied by RIB of Italy, is a chique crash resistant parking bollard Cyprus which meets the demands of high security parking areas.
Available in pnuematic and hydraulic versions.
A full range of access control systems are also available.
RIB Stopper
STOPPER, supplied by RIB of Italy, is a chain barrier Cyprus for controlling parking areas and passageways up to 20 meters wide.
A full range of access control systems are also available.
Sectional & Industrial Garage door openers Cyprus
DITEC-ENTREMATIC TOP
DITEC-ENTREMATIC TOP is the new, faster, quieter and more powerful belt drive unit, all in an elegant, modern design.
The TOP range includes a powerful 600 N and a 1000 N motor which allow doors of up to 210 kg and over 17 mq surface area to be controlled at speeds up to 17% higher than previous products.
Ditec TOP is amongst the safest products in its category and meets the highest safety standards. In addition to complying with current European Regulations (CE mark) regarding electrical safety and electromagnetic compatibility, it also bears the GS quality mark (Geprüfte Sicherheit - “Tested Safety”). This is certified by TÜV, an independent international certification body spe-cialised in technology safety and quality evaluation.
DITEC-ENTREMATIC DOD
DITEC-ENTREMATIC DOD Industrial door opener is versatile, compact and full of accessories.
The physical conformation of the Dod system integrates it perfectly with a vast range of accessories that enable it to be tailored to the most widely varying operating needs.
The compact structure and modest size of the structure enables it to be installed even in small and narrow spaces.
Tubular motors for Roller Shutters Cyprus
SELVE also maufacture a full range of versitile electronic motors which are equipped with automatic cut off systems which detect obstacles either in the upwards or downwards cycles thus avoiding those unwanted repair bills because for example a chair was left underneath the roller shutter while it was closing.
By choosing Selves radio operated motors you will be able to control all of your shutters with just the push of a button, either individually or in groups of up to ten determined by you, in one room or through out the whole building; roller shutters, cyprus, can be moved spontaneously or automatically, depending on the time of day, light, or weather; with this type of motor your options are virtually limitless.
Automations for pedestrian doors Cyprus
Ditec - Entrematic Rex Sliding Pedestrian Door Operator
DITEC/ENTREMATIC - REX sliding pedestrian door automation is an adapable very heavy duty pedestrian door operator.
Pan. Chrysostomou Auto Doors Ltd can supply and install a variable collection powerful Pedestrian door operators, satisfying the needs of high traffic doors and also special requirments for emergency exits and fire doors in complete compliance with European regulations.
Ditec - Entrematic Civik Sliding Pedestrian Door Operator
DITEC/ENTREMATIC - CIVIK The ideal automation for glass, wooden or hide-away or sliding doors. Suitable for next generation offices and private housing.
Ditec - Entrematic Valor sliding Pedestrian Door Operator
DITEC/ENTREMATIC - VALOR Top of the range, for the most demanding commercial applications, model also available for hospitals and atmospherically controlled enviroments.
Ditec - Entrematic DAB105
Swinging Door Automation
DITEC/ENTREMATIC DAB105 is a high performance, (with up to 90kg door weight)swinging door operator.
Ditec - Entrematic DAB205 Swinging Door Automation
The new Ditec DAB205 is the top-of-the-range solution for swing-door automation systems. It features an extremely powerful
gear motor that drives the door open and assists in closing, supported by a spring.
Ditec DAB205 allows to automate swing doors that weigh up to 315 kg with an opening of 1.6 m.
With Ditec DAB205, the user has complete control of the door functioning, with the ability to choose the operating mode that
best meets its requirements, including PUSH&GO, Power Assist and Low Energy modes.
Ditec DAB205 is certified in accordance with European directives and regulations, including the new industry standard EN16005
Operators for opening window domes & side hung shutters Cyprus
Chain Window Operator
Chain operators suitable for bottom hung and outward opening windows this operator features an adjustable stroke from 90 to 400mm.
The chain is rust-proof thanks to the Dacromet coating.
and can be connected in parallel.
Rod Window Operator
linear spindle actuators with rigid shaft provided with limit switch via microswitches, the ideal automation for transoms and domes, max travel of 30 cm.
Rack Window Operators
Linear actuators provided with rack and electronic limit switch suitable for domes, skylights, top-hinged windows and other very heavy windows (by connection of the extra idle unit it is possible to have two thrust points for windows with large dimensions)
Operator for Side Hung Shutters
Ideal for opening and closing your shutters, in winter, in cold weather, in summer, even if your windows have mosquito screens or are difficult to reach.
It is fitted with an electronic clutch which behaves intelligently depending on the absorbed current.
The shutter stops if it meets an obstacle during movement thus protecting the user and the gear motor. In the event of mains power supply failure the user can open or close the shutter immediately without having to unlock it. An electric lock can also be fitted for greater security.